<div dir="ltr"><div>The address data will need to be formatted for OSM. So for example, 1055 PARKFORD DR should be stored as</div><div><br></div><div>addr:housenumber=1055</div><div>addr:street=Parkford Drive</div><div><br></div><div>And so on. There's only 13 TYPEs, 4 DIR_PREFIX and 2 DIR_SUFFIX (along with the above address, where "DR" is in DIR_SUFFIX instead of TYPE), so it shouldn't be too bad even with a more or less manual process.</div><div><br></div><div>It also looks like much of the data in the UNIT field should be imported as addr:unit. For instance, there are many residences at 1251 E LUGONIA AVE. This impacts about 25% of the addresses.</div><div><br></div><div>You should also provide the data as it will be imported well ahead of the import, so that it is clear things like the above are handled.</div><div><br></div><div>The source address data looks like it is pretty well maintained, so should make for a smooth import.</div><div><br></div><div>Thanks,</div><div><br></div><div>Max<br></div></div>