<div dir="ltr">I took a look at one dataset, "Public Refrigerated Warehouses"<div>* According to the metadata, the data was last updated in 2014 - IMO, way too old for import into OSM</div><div>* No way of verifying from overhead imagery as to whether a building is in fact a "refrigerated warehouse", let alone a "public" one (no explanation in the metadata as to what "public" means in this context. Most of these appear to be commercial business based upon their names, so not really open to the public per se)</div><div>* Might even be difficult to determine whether a building is a "refrigerated warehouse" by looking at it from a public street.</div><div>* All of the point locations that I looked at were not located on a building per overhead imagery (typically in the center of a public street) - not a suitable location for OSM for what should be a building. In some cases the points are located in an empty field far away from any structure that could be a warehouse. </div><div>* No explanation in the metadata as to how the locations were obtained - I suspect this was done through automatic geocoding, which in my experience gives incorrect results way too often (depends on the quality of the underlying address data, and the quality of the incoming data).</div><div>* In 12 cases "Address1" is "Not Available" - meaning that if automatic geocoding were used to obtain the location, it would certainly be way too imprecise for OSM.</div><div><br></div><div>Mike</div><div><br></div><div><br></div><div><br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sat, Oct 1, 2022 at 8:19 PM James Crawford via Imports <<a href="mailto:imports@openstreetmap.org">imports@openstreetmap.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<div>
<p style="line-height:100%;margin-bottom:0in">
Hi,</p>
<p style="line-height:100%;margin-bottom:0in"><br>
</p>
<p style="line-height:100%;margin-bottom:0in">I’ve been
preparing an import for the HIFLD for a couple months now. This
dataset is maintained by the US Department of Homeland Security,
and
contains a wide array of data in the US.</p>
<p style="line-height:100%;margin-bottom:0in"><br>
</p>
<p style="line-height:100%;margin-bottom:0in"><br>
</p>
<p style="line-height:100%;margin-bottom:0in">The data varies a
lot in type, accuracy, size, etc. and as such I make individual
documentation on importing with special instructions for each
individual dataset. There are a few different processes I plan to
use
for each dataset that I will detail in this letter:</p>
<p style="line-height:100%;margin-bottom:0in"><br>
</p>
<p style="line-height:100%;margin-bottom:0in">1: Imported
nationwide all at once with review</p>
<p style="line-height:100%;margin-bottom:0in"><br>
</p>
<p style="line-height:100%;margin-bottom:0in"> If a dataset has
about <1000 objects, I feel that it is reasonably small enough
that I could check each object individually, conflate as needed,
and
upload all at once, (possibly using the one feature at a time
option
in JOSM so that the bounding box isn’t large) This way I don’t
have to waste my time making micro-changesets in each state for
like
1-2 objects each. (this is the main strategy for most of the
financial datasets)</p>
<p style="line-height:100%;margin-bottom:0in"><br>
</p>
<p style="line-height:100%;margin-bottom:0in">2: Imported on a
state/local level with review</p>
<p style="line-height:100%;margin-bottom:0in"><br>
</p>
<p style="line-height:100%;margin-bottom:0in"> This one I plan to
do for the majority of datasets. This is for datasets <50000 or
so, where in each state there are about <1000 objects and if I
do
it on the state level I’ll have the time to inspect every single
object individually and ensure high quality data. (This is the
main
strategy for the communications datasets)</p>
<p style="line-height:100%;margin-bottom:0in"><br>
</p>
<p style="line-height:100%;margin-bottom:0in">3: Imported using
MapRoulette</p>
<p style="line-height:100%;margin-bottom:0in"><br>
</p>
<p style="line-height:100%;margin-bottom:0in"> I’m not very
familiar with MapRoulette, but it was suggested as a viable option
for importing this data. For some very particular datasets, such
as
the National Bridge Inventory, it would likely work best, because
a
MR user could add a nearby bridge based on the data provided in
the
point. This may also work well for some data in the public health
section for example, but it remains to be seen.</p>
<p style="line-height:100%;margin-bottom:0in"><br>
</p>
<p style="line-height:100%;margin-bottom:0in">4: Imported on a
state/local level without review</p>
<p style="line-height:100%;margin-bottom:0in"><br>
</p>
<p style="line-height:100%;margin-bottom:0in"> If the locals of a
state are in support of having data added without manual review
before uploading, I am willing to have data added with review
being
done after upload by the locals of a state. I don’t plan on doing
this unless it is explicitly requested.</p>
<p style="line-height:100%;margin-bottom:0in"><br>
</p>
<p style="line-height:100%;margin-bottom:0in">Obtaining local
support:</p>
<p style="line-height:100%;margin-bottom:0in">I am willing to do
the legwork. I plan on spending some time in each state to find
any
mappers that are active in the state and can speak on behalf of
the
local community, so I make sure that I can have full local support
rather than just pinging an empty slack channel and taking silence
as
a yes. I’ll publish a table of the active mappers by state on a
personal wiki page for everyone’s enjoyment as well :)</p>
<p style="line-height:100%;margin-bottom:0in"><br>
</p>
<p style="line-height:100%;margin-bottom:0in">Licensing: </p>
<p style="line-height:100%;margin-bottom:0in">Any data published
by a national agency in the US is required to be in the public
domain. If the HIFLD has external data published, it is
automatically
in the public domain.</p>
<p style="line-height:100%;margin-bottom:0in"><br>
</p>
<p style="line-height:100%;margin-bottom:0in">You can read all
the information about this import, as well as a few drafts I've
written for importing certain datasets here: <a href="https://wiki.openstreetmap.org/wiki/HIFLD" target="_blank">https://wiki.openstreetmap.org/wiki/HIFLD</a><br>
</p>
<p style="line-height:100%;margin-bottom:0in"><br>
</p>
<p style="line-height:100%;margin-bottom:0in">If you would like
to help with importing, please get in touch!</p>
<p style="line-height:100%;margin-bottom:0in"><br>
</p>
<p style="line-height:100%;margin-bottom:0in">Thanks, </p>
<p style="line-height:100%;margin-bottom:0in">- SherbetS (James
Crawford)</p>
<p></p>
</div>
_______________________________________________<br>
Imports mailing list<br>
<a href="mailto:Imports@openstreetmap.org" target="_blank">Imports@openstreetmap.org</a><br>
<a href="https://lists.openstreetmap.org/listinfo/imports" rel="noreferrer" target="_blank">https://lists.openstreetmap.org/listinfo/imports</a><br>
</blockquote></div>