<div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><br>> a spring is groundwater as well.</div><div dir="ltr"><br>A spring is "a place where water naturally flows out from the ground". In a spring, the water table reaches the surface. <br><br>The source of a qanat is underground, at least several meters depth (and often quite far underground), below the underground water table. Sometimes a well was dug first and then a qanat was built. </div><div dir="ltr"><br></div><div dir="ltr">Please see the illustrations and examples on the Proposal page and wikipedia, e.g: <a href="https://en.wikipedia.org/wiki/Qanat#/media/File:Qanat_cross_section.svg">https://en.wikipedia.org/wiki/Qanat#/media/File:Qanat_cross_section.svg</a><br></div><div dir="ltr"><br>> if there are parts that are in pipes, will the qanat be interrupted? If vertical shafts are not present, it is not a qanat (e.g. short enough to not require these shafts)?</div><div dir="ltr"><br></div><div dir="ltr">Qanats were not built from pipes. They are free-flow canals, usually cut directly into bedrock, though that's not a requirement.</div><div dir="ltr"><br></div><div dir="ltr">Currently, if a canal goes into a pipeline, it is standard practice to map the pipeline as `man_made=pipeline` + `substance=water` and perhaps `waterway=pressurised` if relevant. See for example <a href="https://user-images.githubusercontent.com/42757252/76671649-dcce3980-65da-11ea-8dfb-55f9a21c1f12.png">https://user-images.githubusercontent.com/42757252/76671649-dcce3980-65da-11ea-8dfb-55f9a21c1f12.png</a> - at <a href="https://www.openstreetmap.org/#map=17/41.70543/9.05265">https://www.openstreetmap.org/#map=17/41.70543/9.05265</a></div><br>>If vertical shafts are not present, it is not a qanat (e.g. short enough to not require these shafts)?<div dir="ltr"><br></div><div dir="ltr">The vertical shafts are part of the proposed definition. </div><div dir="ltr"><br></div><div dir="ltr">If you check out some examples, you will see that the shafts are usually only 10 to 50m apart, so even quite short qanat usually have more than 1. E.g.: <a href="https://www.openstreetmap.org/edit?way=624008315#map=17/31.43160/-4.36968">https://www.openstreetmap.org/edit?way=624008315#map=17/31.43160/-4.36968</a> - several parallel qanat are visible here (though I don't know if all are still operational) in Morocco.</div><div dir="ltr"><br></div><div>Examples in Afghanistan: <a href="https://overpass-turbo.eu/s/Vhk">https://overpass-turbo.eu/s/Vhk</a></div><div dir="ltr"><br>>> The short definition of the tag will be "A gently-sloping man-made underground channel for transporting groundwater via gravity, with shafts visible from the surface."<br>> my suggestion would be to add a "typically" before "with shafts visible from the surface", because it would seem strange to need a different main tag just because the shafts aren't visible for one reason or the other (e.g. hidden on purpose)</div><div dir="ltr"><br></div><div>Sometimes there are small walls or caps over the shafts to prevent sand or dirt from falling in. I was considering that to be still "visible" in a way, but sure, we could change that. </div><div><br></div><div>– Joseph Eisenberg</div></div></div></div></div></div></div></div>