<div dir="ltr"><div dir="ltr"><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Thu, Dec 24, 2020 at 10:16 AM Volker Schmidt <<a href="mailto:voschix@gmail.com" target="_blank">voschix@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr"><div>Is the pond downstream from a watermill also a stream_pond?</div></div></blockquote></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Thu, Dec 24, 2020 at 1:57 PM Joseph Eisenberg <<a href="mailto:joseph.eisenberg@gmail.com">joseph.eisenberg@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr"><div dir="ltr">I believe most traditional watermills are supplied by a short canal or ditch, so the waterway and the pond are both artificial, no?  In that case I would not use water=stream_pool since the examples are pools below small waterfalls on natural streams. <br></div></div></blockquote><div><br></div><div>The mill pond is certainly an artificial pond, at least if the water level has been raised with a weir (as it usually is). </div><div><br></div><div>The leat or flume, and the tail race are both usually artificial excavations, or artificial elevated conduits.</div><div><br></div><div>Often, the erosion from the tail race will have sculpted a pool downstream of the mill, That's a natural process occurring as a side effect of the artificial stream modifications.  Whether to call it man made is up to you.</div><div><br></div><div>The Roman mills described by Vitruvius had undershot wheels that were placed 'run of the river' in a fast-moving current.  Those didn't require an artificial leat.</div><div><br></div><div>(Homework: Compare and contrast: penstock, head race, leat, lade, midrace, tail race, goit, flume. The millwrights consider these specific technical terms. I don't know enough about that technology. I knoe 'penstock' and 'tailrace' because they are terms still used with steam turbines. On steam turbines, the turbine blades are called 'buckets' and the rotor is called the 'wheel'.  Old terminology dies hard!)</div><div>-- </div><div>73 de ke9tv/2, Kevin </div></div></div>