The problem I have mapping field boundaries round here is that they are very difficult to categorise.<div><br></div><div>Historically, they were all dry stone walls.  However, dry stone walls need rebuilding periodically, which is expensive. If the fields are used for livestock, farmers put up posts with a single strand of barbed wire along the top, to make them stock proof. If this is done on both sides of the wall, this produces a strip of ground up to six feet wide in which anything can grow. So in some places the wall is still in good condition and would be tagged as a wall;  in some places the wall has largely collapsed so the barrier is effectively the two fences with a heap of stone between; and in some places lots of hedgerow plants have taken root and the barrier is a hedge (and maintained as such by the farmer to the extent of getting an annual trim).</div>
<div><br></div><div>All three types can occur within say a 20 metres length of field boundary.  Trying to tag metre by metre depending on appearance would be tedious and produce (IMO) a very ugly map, and impossible to do reliably from aerial imagery;  but any single tag seems misleading.  Any suggestions?</div>