[Geocoding] [Nominatim] Table search_name empty after import

Sarah Hoffmann lonvia at denofr.de
Thu Aug 1 10:02:51 UTC 2013


Hi,

(CC'd back to list)

On Wed, Jul 31, 2013 at 02:51:09PM +0200, Duhail wrote:
> Thank you for your answer.
> 
> We used a shared server and we cannot update postgres, it should
> have risk of impact on other software. In future we will make test
> of install on dedicated server, in this case we will use a 9.x
> postgres.
> 
> We update libtool to last version (2.4.2), the "command not found"
> have disapeared but we still have same problem after import (empty
> table search_name).
> 
> Below the last lines of logs of output command :
> 
> 
> Node stats: total(450286), max(2388505228) in 6s
> Way stats: total(71828), max(230060098) in 4s
> Relation stats: total(1508), max(2969716) in 12s
> node cache: stored: 450286(100.00%), storage efficiency: 53.46%
> (dense blocks: 141, sparse nodes: 348917), hit rate: 100.00%
> Stopping table: planet_osm_nodes
> Stopping table: planet_osm_ways
> Building index on table: planet_osm_ways (fastupdate=off)
> Stopped table: planet_osm_nodes in 0s
> Stopping table: planet_osm_rels
> Building index on table: planet_osm_rels (fastupdate=off)
> Stopped table: planet_osm_rels in 0s
> Stopped table: planet_osm_ways in 4s
> 
> Osm2pgsql took 30s overall
> Functions

Looks like the the import crashed/got killed quite early in the
process. You are missing the entire address indexing part. Normally
the import should end with a number of 'CREATE INDEX' messages.
It's possible that this is due to postgres 8.4 but you will have
to check your postgres logs to see what exactly failed.

> So, for the moment we give up to install nominatim and we will
> probably wait the dedicated server.

Definitly the easier route to go.

Sarah

> On 28/07/2013 22:11, Sarah Hoffmann wrote:
> >Hi,
> >
> >On Fri, Jul 26, 2013 at 11:12:09AM +0200, Duhail wrote:
> >>I try make work Nominatim on a server not connect to internet. I
> >>follow this wiki : http://wiki.openstreetmap.org/wiki/Nominatim.
> >>
> >>Compilation is ok (see make and configure at end of this mail) with
> >>some "command not found" (don't know if it is important or not),
> >>then i launch this command :
> >Those "command not found" errors are important. It looks like
> >some incompatible version of libtool.
> >
> >Side note: You really should be updating to postgresql 9.x. The
> >code hasn't been run against 8.4 for a while, so I'm not even
> >sure it works.
> >
> >>su - postgres -c "/usr/local/Nominatim-2.0.1/utils/setup.php
> >>--osm-file
> >>/data/flf/72xmap/data/tilemaker/osm/bretagne-latest.osm.pbf --all
> >>--osm2pgsql-cache 7000"
> >Did you check the output of this command? Did it finish without
> >errors?
> >
> >Sarah
> >
> >
> >>I removed osmosis-init part because server is not connect to
> >>internet, then i do this request directly on database :
> >>
> >>insert into import_status(lastimportdate) values('now');
> >>
> >>When i try to make this search i not receive any result :
> >>
> >>http://myip/nominatim/search?format=xml&q=Rennes
> >>
> >>And when i make this one :
> >>
> >>http://myip/nominatim/search?format=xml&q=35750
> >>
> >>I receive theses datas :
> >>
> >><searchresults timestamp="Mon, 22 Jul 2013 13:27:08 CEST"
> >>attribution="Data © OpenStreetMap contributors, ODbL 1.0.
> >>http://www.openstreetmap.org/copyright" querystring="35750"
> >>polygon="false" exclude_place_ids="124886" more_url="http://devosmap/search?format=xml&exclude_place_ids=124886&accept-language=en-US,en;q=0.5&q=35750"><place
> >>place_id="124886" place_rank="21" boundingbox="34.941946258545,34.961950073242,-86.606893310547,-86.586885681152"
> >>lat="34.951947612019" lon="-86.5968868394372" display_name="35750,
> >>United States of America" class="place"
> >>type="postcode"/></searchresults>
> >>
> >>
> >>Seems that import have work only for default us datas but not for
> >>data inside osm files :
> >>
> >>select count(*) from search_name;
> >>  count
> >>-------
> >>  32388
> >>(1 row)
> >>
> >>
> >>select * from search_name where country_code!='us' and country_code!='ca';
> >>  place_id | search_rank | address_rank | importance | country_code |
> >>name_vector | nameaddress_vector | centroid
> >>----------+-------------+--------------+------------+--------------+-------------+--------------------+----------
> >>(0 rows)
> >>
> >>Tables planet_osm_* ara populated (but without tags, i don't know if
> >>it is important) :
> >>
> >>select count(*) from planet_osm_ways;
> >>   count
> >>---------
> >>  2757773
> >>(1 row)
> >>
> >>
> >>select count(*) from planet_osm_ways where tags is not null;
> >>  count
> >>-------
> >>      0
> >>(1 row)
> >>
> >>I continue search why all datas are not imported, but for the moment
> >>i'm blocked :(
> >>
> >>Thanks to all who will have any idea for any help.
> >>
> >>Regards,
> >>
> >>
> >>********
> >>Server Info
> >>RedHat 5.5 64bits
> >>PostgreSQL 8.4.5
> >>PHP 5.1.6
> >>Nominatim 2.0.1
> >>OSM2PgSQL 0.83.0 (64bit id space) avec support PBF
> >>
> >>Configure :
> >>
> >>checking for a BSD-compatible install... /usr/bin/install -c
> >>checking whether build environment is sane... yes
> >>checking for gawk... gawk
> >>checking whether make sets $(MAKE)... yes
> >>checking for gcc... gcc
> >>checking for C compiler default output file name... a.out
> >>checking whether the C compiler works... yes
> >>checking whether we are cross compiling... no
> >>checking for suffix of executables...
> >>checking for suffix of object files... o
> >>checking whether we are using the GNU C compiler... yes
> >>checking whether gcc accepts -g... yes
> >>checking for gcc option to accept ISO C89... none needed
> >>checking for style of include used by make... GNU
> >>checking dependency style of gcc... gcc3
> >>checking for g++... g++
> >>checking whether we are using the GNU C++ compiler... yes
> >>checking whether g++ accepts -g... yes
> >>checking dependency style of g++... gcc3
> >>checking build system type... x86_64-unknown-linux-gnu
> >>checking host system type... x86_64-unknown-linux-gnu
> >>checking for the pthreads library -lpthreads... no
> >>checking whether pthreads work without any flags... no
> >>checking whether pthreads work with -Kthread... no
> >>checking whether pthreads work with -kthread... no
> >>checking for the pthreads library -llthread... no
> >>checking whether pthreads work with -pthread... yes
> >>checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE
> >>checking if more special flags are required for pthreads... no
> >>checking how to run the C preprocessor... gcc -E
> >>checking for grep that handles long lines and -e... /bin/grep
> >>checking for egrep... /bin/grep -E
> >>checking for ANSI C header files... yes
> >>checking for sys/types.h... yes
> >>checking for sys/stat.h... yes
> >>checking for stdlib.h... yes
> >>checking for string.h... yes
> >>checking for memory.h... yes
> >>checking for strings.h... yes
> >>checking for inttypes.h... yes
> >>checking for stdint.h... yes
> >>checking for unistd.h... yes
> >>checking for geos-config... /usr/bin/geos-config
> >>checking for geos libraries... checking geos/version.h usability... yes
> >>checking geos/version.h presence... yes
> >>checking for geos/version.h... yes
> >>
> >>yes
> >>checking for proj headers in /usr/include... found
> >>checking for proj library... found
> >>checking for proj projection library... yes
> >>checking for pg_config... /usr/bin/pg_config
> >>checking for PostgreSQL libraries... yes
> >>checking if PostgreSQL version is >= 8.4... yes
> >>checking for bzip2 headers in /usr/include... found
> >>checking for bzip2 library... found
> >>checking for bzip2 compression library... yes
> >>checking for xml2-config... /usr/bin/xml2-config
> >>checking for libxml - version >= 2.0.0... yes (version 2.6.26)
> >>configure: creating ./config.status
> >>config.status: creating Makefile
> >>config.status: creating nominatim/Makefile
> >>config.status: creating module/Makefile
> >>config.status: creating nominatim/config.h
> >>config.status: nominatim/config.h is unchanged
> >>config.status: executing depfiles commands
> >>=== configuring in osm2pgsql (/usr/local/Nominatim-2.0.1/osm2pgsql)
> >>configure: running /bin/sh ./configure '--prefix=/usr/local'
> >>--cache-file=/dev/null --srcdir=.
> >>checking for a BSD-compatible install... /usr/bin/install -c
> >>checking whether build environment is sane... yes
> >>checking for gawk... gawk
> >>checking whether make sets $(MAKE)... yes
> >>checking for style of include used by make... GNU
> >>checking for gcc... gcc
> >>checking for C compiler default output file name... a.out
> >>checking whether the C compiler works... yes
> >>checking whether we are cross compiling... no
> >>checking for suffix of executables...
> >>checking for suffix of object files... o
> >>checking whether we are using the GNU C compiler... yes
> >>checking whether gcc accepts -g... yes
> >>checking for gcc option to accept ISO C89... none needed
> >>checking dependency style of gcc... gcc3
> >>checking for sys/wait.h that is POSIX.1 compatible... yes
> >>checking how to run the C preprocessor... gcc -E
> >>checking for grep that handles long lines and -e... /bin/grep
> >>checking for egrep... /bin/grep -E
> >>checking for ANSI C header files... yes
> >>checking for sys/types.h... yes
> >>checking for sys/stat.h... yes
> >>checking for stdlib.h... yes
> >>checking for string.h... yes
> >>checking for memory.h... yes
> >>checking for strings.h... yes
> >>checking for inttypes.h... yes
> >>checking for stdint.h... yes
> >>checking for unistd.h... yes
> >>checking for stdlib.h... (cached) yes
> >>checking for unistd.h... (cached) yes
> >>checking for getpagesize... yes
> >>checking for working mmap... yes
> >>checking for gcc option to accept ISO C99... -std=gnu99
> >>checking for g++... g++
> >>checking whether we are using the GNU C++ compiler... yes
> >>checking whether g++ accepts -g... yes
> >>checking dependency style of g++... gcc3
> >>checking for g++... yes
> >>checking build system type... x86_64-unknown-linux-gnu
> >>checking host system type... x86_64-unknown-linux-gnu
> >>checking for a sed that does not truncate output... /bin/sed
> >>checking for fgrep... /bin/grep -F
> >>checking for ld used by gcc -std=gnu99... /usr/bin/ld
> >>checking if the linker (/usr/bin/ld) is GNU ld... yes
> >>checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
> >>checking the name lister (/usr/bin/nm -B) interface... BSD nm
> >>checking whether ln -s works... yes
> >>checking the maximum length of command line arguments... 98304
> >>checking whether the shell understands some XSI constructs... yes
> >>checking whether the shell understands "+="... yes
> >>checking for /usr/bin/ld option to reload object files... -r
> >>checking for objdump... objdump
> >>checking how to recognize dependent libraries... pass_all
> >>checking for ar... ar
> >>checking for strip... strip
> >>checking for ranlib... ranlib
> >>checking command to parse /usr/bin/nm -B output from gcc -std=gnu99
> >>object... ok
> >>checking for dlfcn.h... yes
> >>checking whether we are using the GNU C++ compiler... (cached) yes
> >>checking whether g++ accepts -g... (cached) yes
> >>checking dependency style of g++... (cached) gcc3
> >>checking how to run the C++ preprocessor... g++ -E
> >>checking for objdir... .libs
> >>checking if gcc -std=gnu99 supports -fno-rtti -fno-exceptions... no
> >>checking for gcc -std=gnu99 option to produce PIC... -fPIC -DPIC
> >>checking if gcc -std=gnu99 PIC flag -fPIC -DPIC works... yes
> >>checking if gcc -std=gnu99 static flag -static works... yes
> >>checking if gcc -std=gnu99 supports -c -o file.o... yes
> >>checking if gcc -std=gnu99 supports -c -o file.o... (cached) yes
> >>checking whether the gcc -std=gnu99 linker (/usr/bin/ld -m
> >>elf_x86_64) supports shared libraries... yes
> >>checking whether -lc should be explicitly linked in... no
> >>checking dynamic linker characteristics... GNU/Linux ld.so
> >>checking how to hardcode library paths into programs... immediate
> >>checking whether stripping libraries is possible... yes
> >>checking if libtool supports shared libraries... yes
> >>checking whether to build shared libraries... yes
> >>checking whether to build static libraries... yes
> >>checking for ld used by g++... /usr/bin/ld -m elf_x86_64
> >>checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
> >>checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports
> >>shared libraries... yes
> >>checking for g++ option to produce PIC... -fPIC -DPIC
> >>checking if g++ PIC flag -fPIC -DPIC works... yes
> >>checking if g++ static flag -static works... yes
> >>checking if g++ supports -c -o file.o... yes
> >>checking if g++ supports -c -o file.o... (cached) yes
> >>checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports
> >>shared libraries... yes
> >>checking dynamic linker characteristics... GNU/Linux ld.so
> >>checking how to hardcode library paths into programs... immediate
> >>checking for lseek64... yes
> >>checking for posix_fallocate... yes
> >>checking for posix_fadvise... yes
> >>checking for sync_file_range... no
> >>checking for xml2-config... /usr/bin/xml2-config
> >>checking for xml2 libraries... yes
> >>checking for zlib headers in /usr/include... found
> >>checking for zlib library... found
> >>checking for zlib compression library... yes
> >>checking for bzip2 headers in /usr/include... found
> >>checking for bzip2 library... found
> >>checking for bzip2 compression library... yes
> >>checking for geos-config... /usr/bin/geos-config
> >>checking for geos libraries... checking geos/version.h usability... yes
> >>checking geos/version.h presence... yes
> >>checking for geos/version.h... yes
> >>
> >>yes
> >>checking for proj headers in /usr/include... found
> >>checking for proj library... found
> >>checking for proj projection library... yes
> >>checking for protobuf-c 0.14...
> >>checking for protobuf_c headers in /usr/include... found
> >>checking for protobuf_c library... found
> >>checking for protobuf-c version >= 0.14...
> >>checking for ProtobufCFieldDescriptor.packed... yes
> >>protobuf-c >= 0.14: yes
> >>checking for protobuf-c usability... yes
> >>checking for protoc-c... /usr/bin/protoc-c
> >>checking for pg_config... /usr/bin/pg_config
> >>checking for PostgreSQL libraries... yes
> >>checking for the pthreads library -lpthreads... no
> >>checking whether pthreads work without any flags... no
> >>checking whether pthreads work with -Kthread... no
> >>checking whether pthreads work with -kthread... no
> >>checking for the pthreads library -llthread... no
> >>checking whether pthreads work with -pthread... yes
> >>checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE
> >>checking if more special flags are required for pthreads... no
> >>configure: creating ./config.status
> >>config.status: creating Makefile
> >>config.status: creating legacy/Makefile
> >>config.status: creating config.h
> >>config.status: config.h is unchanged
> >>config.status: executing depfiles commands
> >>config.status: executing libtool commands
> >>
> >>
> >>Make
> >>
> >>Making all in osm2pgsql
> >>make[1]: Entering directory `/usr/local/Nominatim-2.0.1/osm2pgsql'
> >>make all-recursive
> >>make[2]: Entering directory `/usr/local/Nominatim-2.0.1/osm2pgsql'
> >>make[3]: Entering directory `/usr/local/Nominatim-2.0.1/osm2pgsql'
> >>/bin/sh ./libtool --tag=CXX --mode=link g++  -g -O2 -pthread
> >>-L/usr/lib -lz -L/usr/lib64 -lpq -lxml2 -lz -lm -L/usr/lib -lbz2
> >>-L/usr/lib64 -L/usr/lib64 -lgeos -L/usr/lib -lproj -L/usr/lib
> >>-lprotobuf-c  -o osm2pgsql  build_geometry.o input.o output-pgsql.o
> >>rb.o middle-pgsql.o osm2pgsql.o sprompt.o UTF8sanitizer.o
> >>expire-tiles.o keyvals.o output-null.o parse-primitive.o
> >>parse-xml2.o pgsql.o reprojection.o middle-ram.o output-gazetteer.o
> >>text-tree.o node-ram-cache.o wildcmp.o node-persistent-cache.o
> >>binarysearcharray.o parse-pbf.o fileformat.pb-c.o osmformat.pb-c.o
> >>./libtool: line 827: X--tag=CXX: command not found
> >>./libtool: line 860: libtool: ignoring unknown tag : command not found
> >>./libtool: line 827: X--mode=link: command not found
> >>./libtool: line 993: *** Warning: inferring the mode of operation is
> >>deprecated.: command not found
> >>./libtool: line 994: *** Future versions of Libtool will require
> >>--mode=MODE be specified.: command not found
> >>gcc: no input files
> >>gcc: no input files
> >>gcc: no input files
> >>gcc: no input files
> >>./libtool: line 2230: X-g: command not found
> >>./libtool: line 2230: X-O2: command not found
> >>./libtool: line 1950: X-L/usr/lib: No such file or directory
> >>./libtool: line 1950: X-L/usr/lib64: No such file or directory
> >>./libtool: line 1950: X-L/usr/lib: No such file or directory
> >>./libtool: line 1950: X-L/usr/lib64: No such file or directory
> >>./libtool: line 1950: X-L/usr/lib64: No such file or directory
> >>./libtool: line 1950: X-L/usr/lib: No such file or directory
> >>./libtool: line 1950: X-L/usr/lib: No such file or directory
> >>./libtool: line 2399: Xosm2pgsql: command not found
> >>./libtool: line 2404: X: command not found
> >>./libtool: line 2411: Xosm2pgsql: command not found
> >>./libtool: line 2546: X-lz: command not found
> >>./libtool: line 2546: X-lpq: command not found
> >>./libtool: line 2546: X-lxml2: command not found
> >>./libtool: line 2546: X-lz: command not found
> >>./libtool: line 2546: X-lm: command not found
> >>./libtool: line 2546: X-lbz2: command not found
> >>./libtool: line 2546: X-lgeos: command not found
> >>./libtool: line 2546: X-lproj: command not found
> >>./libtool: line 2546: X-lprotobuf-c: command not found
> >>./libtool: line 2628: X-L/usr/local/Nominatim-2.0.1/osm2pgsql: No
> >>such file or directory
> >>./libtool: line 2546: X-lpq: command not found
> >>./libtool: line 2546: X-lxml2: command not found
> >>./libtool: line 2546: X-lz: command not found
> >>./libtool: line 2546: X-lm: command not found
> >>./libtool: line 2546: X-lbz2: command not found
> >>./libtool: line 2546: X-lgeos: command not found
> >>./libtool: line 2546: X-lproj: command not found
> >>./libtool: line 2546: X-lprotobuf-c: command not found
> >>./libtool: line 2628: X-L/usr/local/Nominatim-2.0.1/osm2pgsql: No
> >>such file or directory
> >>./libtool: line 2546: X-lpq: command not found
> >>./libtool: line 2546: X-lxml2: command not found
> >>./libtool: line 2546: X-lz: command not found
> >>./libtool: line 2546: X-lm: command not found
> >>./libtool: line 2546: X-lbz2: command not found
> >>./libtool: line 2546: X-lgeos: command not found
> >>./libtool: line 2546: X-lproj: command not found
> >>./libtool: line 2546: X-lprotobuf-c: command not found
> >>./libtool: line 5155: Xg++ "" "" -pthread -o @OUTPUT@
> >>build_geometry.o input.o output-pgsql.o rb.o middle-pgsql.o
> >>osm2pgsql.o sprompt.o UTF8sanitizer.o expire-tiles.o keyvals.o
> >>output-null.o parse-primitive.o parse-xml2.o pgsql.o reprojection.o
> >>middle-ram.o output-gazetteer.o text-tree.o node-ram-cache.o
> >>wildcmp.o node-persistent-cache.o binarysearcharray.o parse-pbf.o
> >>fileformat.pb-c.o osmformat.pb-c.o
> >>-L/usr/local/Nominatim-2.0.1/osm2pgsql -lpq -lxml2 -lz -lm -lbz2
> >>-lgeos -lproj -lprotobuf-c: File name too long
> >>./libtool: line 5156: Xg++ "" "" -pthread -o @OUTPUT@
> >>build_geometry.o input.o output-pgsql.o rb.o middle-pgsql.o
> >>osm2pgsql.o sprompt.o UTF8sanitizer.o expire-tiles.o keyvals.o
> >>output-null.o parse-primitive.o parse-xml2.o pgsql.o reprojection.o
> >>middle-ram.o output-gazetteer.o text-tree.o node-ram-cache.o
> >>wildcmp.o node-persistent-cache.o binarysearcharray.o parse-pbf.o
> >>fileformat.pb-c.o osmformat.pb-c.o
> >>-L/usr/local/Nominatim-2.0.1/osm2pgsql -lpq -lxml2 -lz -lm -lbz2
> >>-lgeos -lproj -lprotobuf-c: File name too long
> >>./libtool: line 5161: X: command not found
> >>./libtool: line 5165: : command not found
> >>/bin/sh ./libtool --tag=CC --mode=link gcc -std=gnu99 -pthread
> >>-I/usr/include -I/usr/include/libxml2 -I/usr/include -I/usr/include
> >>-I/usr/include  -I/usr/include
> >>-DOSM2PGSQL_DATADIR='"/usr/local/share/osm2pgsql"'
> >>-DVERSION='"0.81.0"'  -g -O2 -pthread -L/usr/lib -lz -L/usr/lib64
> >>-lpq -lxml2 -lz -lm -L/usr/lib -lbz2 -L/usr/lib64 -L/usr/lib64
> >>-lgeos -L/usr/lib -lproj -L/usr/lib -lprotobuf-c  -o
> >>nodecachefilereader node-persistent-cache-reader.o
> >>node-persistent-cache.o node-ram-cache.o binarysearcharray.o
> >>./libtool: line 827: X--tag=CC: command not found
> >>./libtool: line 860: libtool: ignoring unknown tag : command not found
> >>./libtool: line 827: X--mode=link: command not found
> >>./libtool: line 993: *** Warning: inferring the mode of operation is
> >>deprecated.: command not found
> >>./libtool: line 994: *** Future versions of Libtool will require
> >>--mode=MODE be specified.: command not found
> >>./libtool: line 2230: X-std=gnu99: command not found
> >>./libtool: line 2230: X-I/usr/include: No such file or directory
> >>./libtool: line 2230: X-I/usr/include/libxml2: No such file or directory
> >>./libtool: line 2230: X-I/usr/include: No such file or directory
> >>./libtool: line 2230: X-I/usr/include: No such file or directory
> >>./libtool: line 2230: X-I/usr/include: No such file or directory
> >>./libtool: line 2230: X-I/usr/include: No such file or directory
> >>./libtool: line 2230:
> >>X-DOSM2PGSQL_DATADIR="/usr/local/share/osm2pgsql": No such file or
> >>directory
> >>./libtool: line 2230: X-DVERSION="0.81.0": command not found
> >>./libtool: line 2230: X-g: command not found
> >>./libtool: line 2230: X-O2: command not found
> >>./libtool: line 1950: X-L/usr/lib: No such file or directory
> >>./libtool: line 1950: X-L/usr/lib64: No such file or directory
> >>./libtool: line 1950: X-L/usr/lib: No such file or directory
> >>./libtool: line 1950: X-L/usr/lib64: No such file or directory
> >>./libtool: line 1950: X-L/usr/lib64: No such file or directory
> >>./libtool: line 1950: X-L/usr/lib: No such file or directory
> >>./libtool: line 1950: X-L/usr/lib: No such file or directory
> >>./libtool: line 2399: Xnodecachefilereader: command not found
> >>./libtool: line 2404: X: command not found
> >>./libtool: line 2411: Xnodecachefilereader: command not found
> >>./libtool: line 2546: X-lz: command not found
> >>./libtool: line 2546: X-lpq: command not found
> >>./libtool: line 2546: X-lxml2: command not found
> >>./libtool: line 2546: X-lz: command not found
> >>./libtool: line 2546: X-lm: command not found
> >>./libtool: line 2546: X-lbz2: command not found
> >>./libtool: line 2546: X-lgeos: command not found
> >>./libtool: line 2546: X-lproj: command not found
> >>./libtool: line 2546: X-lprotobuf-c: command not found
> >>./libtool: line 2628: X-L/usr/local/Nominatim-2.0.1/osm2pgsql: No
> >>such file or directory
> >>./libtool: line 2546: X-lpq: command not found
> >>./libtool: line 2546: X-lxml2: command not found
> >>./libtool: line 2546: X-lz: command not found
> >>./libtool: line 2546: X-lm: command not found
> >>./libtool: line 2546: X-lbz2: command not found
> >>./libtool: line 2546: X-lgeos: command not found
> >>./libtool: line 2546: X-lproj: command not found
> >>./libtool: line 2546: X-lprotobuf-c: command not found
> >>./libtool: line 2628: X-L/usr/local/Nominatim-2.0.1/osm2pgsql: No
> >>such file or directory
> >>./libtool: line 2546: X-lpq: command not found
> >>./libtool: line 2546: X-lxml2: command not found
> >>./libtool: line 2546: X-lz: command not found
> >>./libtool: line 2546: X-lm: command not found
> >>./libtool: line 2546: X-lbz2: command not found
> >>./libtool: line 2546: X-lgeos: command not found
> >>./libtool: line 2546: X-lproj: command not found
> >>./libtool: line 2546: X-lprotobuf-c: command not found
> >>./libtool: line 5155: Xgcc "" -pthread "" "" "" "" "" "" "" "" "" ""
> >>-pthread -o @OUTPUT@ node-persistent-cache-reader.o
> >>node-persistent-cache.o node-ram-cache.o binarysearcharray.o
> >>-L/usr/local/Nominatim-2.0.1/osm2pgsql -lpq -lxml2 -lz -lm -lbz2
> >>-lgeos -lproj -lprotobuf-c: No such file or directory
> >>./libtool: line 5156: Xgcc "" -pthread "" "" "" "" "" "" "" "" "" ""
> >>-pthread -o @OUTPUT@ node-persistent-cache-reader.o
> >>node-persistent-cache.o node-ram-cache.o binarysearcharray.o
> >>-L/usr/local/Nominatim-2.0.1/osm2pgsql -lpq -lxml2 -lz -lm -lbz2
> >>-lgeos -lproj -lprotobuf-c: No such file or directory
> >>./libtool: line 5161: X: command not found
> >>./libtool: line 5165: : command not found
> >>make[3]: Leaving directory `/usr/local/Nominatim-2.0.1/osm2pgsql'
> >>make[2]: Leaving directory `/usr/local/Nominatim-2.0.1/osm2pgsql'
> >>make[1]: Leaving directory `/usr/local/Nominatim-2.0.1/osm2pgsql'
> >>Making all in module
> >>make[1]: Entering directory `/usr/local/Nominatim-2.0.1/module'
> >>Makefile:9: warning: overriding commands for target `install'
> >>/usr/lib64/pgsql/pgxs/src/makefiles/pgxs.mk:104: warning: ignoring
> >>old commands for target `install'
> >>chmod 755 nominatim.so
> >>make[1]: Leaving directory `/usr/local/Nominatim-2.0.1/module'
> >>Making all in nominatim
> >>make[1]: Entering directory `/usr/local/Nominatim-2.0.1/nominatim'
> >>make all-am
> >>make[2]: Entering directory `/usr/local/Nominatim-2.0.1/nominatim'
> >>
> >>
> >>
> >>
> >>_______________________________________________
> >>Geocoding mailing list
> >>Geocoding at openstreetmap.org
> >>http://lists.openstreetmap.org/listinfo/geocoding
> >
> 
> 
> -- 
> Jean-Charles Duhail
> Consultant AUSY
> 02 90 02 61 49



More information about the Geocoding mailing list