[HOT] Padang image problems

Nelson nelsonjsilva at simplesnet.pt
Sun Jan 29 15:27:38 GMT 2012


Hello Jean,

 

In attach you can see my Preferences in JOSM. But still not draw the images
:-(

I don’t understand the problem.

 

Thanks

Nelson

 

  _____  

De: Jean-Guilhem Cailton [mailto:jgc at arkemie.com] 
Enviada: quinta-feira, 26 de Janeiro de 2012 19:09
Para: Nelson
Assunto: Re: [HOT] Padang image problems

 

Nelson,

Here is a print screen. The relevant line is in the lower list (first part
highlighted in blue).

(BM at the beginning of the name is just an alphabetical trick I used to
have it appear on screen in the menu, because my list has grown very long).

To add this line in your configuration, click on the "+" button at the right
of this list, as I told you earlier.

Hope this helps,

Jean-Guilhem



Le 26/01/2012 17:48, Nelson a écrit : 

Jean,

 

I can’t see what is the line that you said.

Can you send me a print screen of your WMS-TMS configurations?

In the Settings for WMS-TMS, you use the default by JOSM?

 

Thanks and sorry to be boring.

 

Nelson

 

  _____  

De: Jean-Guilhem Cailton [mailto:jgc at arkemie.com] 
Enviada: quinta-feira, 26 de Janeiro de 2012 16:34
Para: Nelson
Assunto: Re: [HOT] Padang image problems

 

Hi Nelson,

Do you get any error message in JOSM console (from where you start it)?

For your information, I have a line in JOSM WMS-TMS preferences, with:
- supplier: 
BM - Padang2-

- web address: 
tms: <http://aerial.openstreetmap.or.id/padang2/>
http://aerial.openstreetmap.or.id/padang2/{zoom}/{x}/{-y}.png

And this works for me. Is your line any different?

Jean-Guilhem


Le 26/01/2012 16:14, Nelson a écrit : 

Hi Jean,

Almost everything working, but after configuring the images in Preferences,
when i try to add then to JOSM, he shows the name of each image in red and
with error

 

I try with boot "!" and "-".

 

Thanks for your help

NS

 

  _____  

De: Jean-Guilhem Cailton [mailto:jgc at arkemie.com] 
Enviada: quinta-feira, 26 de Janeiro de 2012 15:01
Para: Nelson
Assunto: Re: [HOT] Padang image problems

 


Le 26/01/2012 15:14, Nelson a écrit : 

Thanks Jean and Jim for your answers.

I’m not a JOSM user. I have downloaded the tested JOSM file and open it.
When I try to Take a Job in the Tasking Manager, he said “If you have JOSM
already running, closing this dialog box should load data for the area of
the current task,” but then he gives an error. I must install JOSM or can I
use this JAR file or the JOSM-webstart?


What error do you get? It works for me with JOSM 4667 (current "stable"
version).

Check that "remote control" is activated in preferences.




 

I downloaded the export.osm and loaded him in JOSM.


Good. So problem above is solved this way too.




Then I try to add the images in menu Imagery>Rectified Images, right? 


No. This was for WMS imagery only, but it's been a long time since I last
used it. :)

Go in Preferences / WMS-TMS. Click on "+", and paste the URL in the TMS tab
(under an adequate name, like "Padang 2" or 1). After you validate, the URL
should appear in the active suppliers list (with a "tms:" prefix), and the
name in the imagery list.




But gives me a red background and the word error. I have see the messages in
last December related to this, and use the “-“ instead of the “!”

 

Any suggestion? 

Sorry my newbie questions for JOSM, but it is my first time with it.


You are very welcome Nelson. 

Happy mapping! :)

Jean-Guilhem




 

NS

 

  _____  

De: Jean-Guilhem Cailton [mailto:jgc at arkemie.com] 
Enviada: quinta-feira, 26 de Janeiro de 2012 13:38
Para: Nelson
Cc: hot at openstreetmap.org
Assunto: Re: [HOT] Padang image problems

 

Le 26/01/2012 13:35, Nelson a écrit : 

Hello,

 

After I add my vector file related to my first job, I try to configure the
background of Potlatch 2 with the images for the Padang map. But when I call
the image, nothing happen.

At the status bar of the web browser the message is Waiting for
aerial.openstreetmap.or.id


 

Any tip or tricks?


Hello Nelson,

Due to a Y origin for these (TMS) tiles different from what is used usually
in OSM (and Gogol and...), I think you can't use the Padang images in
Potlatch (unless things have changed recently). This is why a "-" or a "!"
is required in the URL for JOSM (depending on the version), which knows how
to make tile requests for this scheme.

So I think you'd better use JOSM.

The task page should probably be corrected to reflect this.

Best wishes,

Jean-Guilhem





-- 
gpg 0x5939EAE2






-- 
gpg 0x5939EAE2





-- 
gpg 0x5939EAE2

 

-- 
gpg 0x5939EAE2
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstreetmap.org/pipermail/hot/attachments/20120129/994b1123/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: TMS_Padang_Nelson.PNG
Type: image/png
Size: 120936 bytes
Desc: not available
URL: <http://lists.openstreetmap.org/pipermail/hot/attachments/20120129/994b1123/attachment-0001.png>


More information about the HOT mailing list