[talk-au] Sources for power line details, NSW
cameron at dewitte.id.au
cameron at dewitte.id.au
Sun Apr 19 21:38:11 UTC 2020
AEMO has a map of national transmission infrastructure and voltages too, but as far as licensing goes I'm almost certain it's not OSM compatible.
https://www.aemo.com.au/aemo/apps/visualisations/map.html
________________________________
From: forster at ozonline.com.au
Sent: Monday, 20 April 2020 7:28 am
To: talk-au at openstreetmap.org
Subject: Re: [talk-au] Sources for power line details, NSW
Hi
In the state of Victoria at least, you can do a bit by visual
inspection. With timber poles, the voltages typically are 415v 22kv
and 66kv. If it feeds houses and shops its 415v. If it feeds into pole
mounted transformers (with 415v out) its 22kv. If it feeds into small
suburban sub stations (22kv output) its 66kv.
The 66kv comes from the really big sub stations which are fed from the
steel towers. Steel tower voltages typically 220kv, 330kv and 500kv.
The snowy mountains link is 330kv. 500kv are 3 conductors in a
horizontal configuration, each conductot a bundle of 4 conductors.
Tony
> Hi all,
> I've been wondering if there are usable sources to add voltage and
> other power line details to OSM.
>
> I see distinctly different power lines and poles around my area but
> so far I was not able to find details about them.
>
> On Ausgrid I can identify all power poles though not OSM licenced.
_______________________________________________
Talk-au mailing list
Talk-au at openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-au
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstreetmap.org/pipermail/talk-au/attachments/20200420/93f8116a/attachment.htm>
More information about the Talk-au
mailing list