[Talk-GB] Invalid building levels and building (part) height license compatibility
Warin
61sundowner at gmail.com
Mon Mar 18 23:41:11 UTC 2019
On 19/03/19 10:13, Andy Townsend wrote:
>
> On 18/03/2019 21:05, Neil Matthews wrote:
>>
>> P.S. Any suggestions on how I can measure buildings "on-foot"
>> greatly apreciated...
>>
>>
> If you can't get hold of one of these*:
> https://www.aols.org/archives/historical-artifacts?page=13 , and if
> you're after the heights of large buildings in a city that you can get
> fairly close to, how about a plastic set-square held horizontal by
> aligning the perpendicular side to a piece of string held down by a
> weight? The height of the building should be half your distance from
> it. Or just cheat and count the floors.
>
> Best Regards,
>
> Andy
>
> * turn the mirror through 90 degrees, look through the gap and at the
> reflection of your eye, adjust the weight and read the number off the
> scale
For a chimney that is surrounded by a building I used the shadow of the
chimney vs the shadow of the building. Do tag the source:height !
Someone may be able to do better, if not at least it provides amusement
for others.
More information about the Talk-GB
mailing list