[HOT] My tips and tricks for JOSM to mark faster the damaged and collapsed buildings - http://tasks.hotosm.org/job/350

Fri Nov 15 07:41:46 UTC 2013

An alternative to using filters in JOSM is to use this mapcss
styling (attached with this mail) to highlight buildings with required tags
for job 350.
It can also be downloaded at this link:
https://drive.google.com/file/d/0BzVJmbAKs1tYa1FnNE5YTnhuTTQ/edit?usp=sharing

Using this mapcss,

Objects with only building=yes tags are indicated by a grey dashed outline.

Objects with building=damaged or building=collapsed tags are indicated by a
red dashed outline.

Objects with building=damaged or building = collapsed tags along with
typhoon:damage=yes tag are indicated by a blue dashed outline.
Objects with the aforementioned tags along with the source tag are
indicated by a green outline.

--Pratik

On Wed, Nov 13, 2013 at 11:03 PM, Andrew Buck <andrew.r.buck at gmail.com>wrote:

> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> In addition to using ctrl+w to make them wireframe, you can press F12
> to bring up the preferences and on the first tab on the left side
> which is selected, then go to the 'OSM Data' tab at the top, then
> check the 'Draw only outlines of areas' box.  This will make it draw
> the outer way with the proper styling used, but will not draw the
> shading in the middle part of the building.
>
> Also, if you look on the wiki page (address below) you will see a
> mapcss file for josm.  I am about to update that to include some
> changes I made to the styling as well as show a couple new tags.  This
> custom map style works like a filter, but is much more effective since
> you can see all the categories at once.  If someone could actually
> move that code to the proper place in the josm wiki so that it is
> installable via the josm preferences I would appreciate it.
>
> https://wiki.openstreetmap.org/wiki/Typhoon_Haiyan
>
> - -AndrewBuck
>
>
>
>
> On 11/13/2013 10:13 AM, xkomczax at centrum.cz wrote:
> > For faster marking damaged and collapsed buildings (task
> > http://tasks.hotosm.org/job/350 ) in JOSM, I developed few tricks,
> > which makes the whole process faster. The only extra thing you need
> > is to install utilsplugins2 .
> >
> > First, by pressing Ctrl+w you will make all the objects
> > transparent. That is necessary for viewing the current status of
> > building.
> >
> > For filters: if you don't want to be bothered by some elements (for
> > instance landuse=residential in the big cities), you can just add
> > new filter and write into input  landuse=residential to hide it. By
> > checking the second checkbox (Hidding filter) you can even get rid
> > off the borders of element.
> >
> > But the most powerful thing about filters: if you add new filter
> > building=collapsed and building=damaged, you can easily see what is
> > already done (even when the transparency by pressing Ctrl+w is
> > active). If only few buildings in the area are damaged, but most of
> > them is collapsed, you can easily mark the damaged, then by
> > dragging the mouse over the area select the rest of the houses, in
> > main menu go to Selection → Unselect nodes (make sure no other
> > elements such as roads are selected) and you have selected the
> > collapsed buildings only, which you can marked as
> > building=collapsed in one step. At the very end, when you have to
> > add typhoon:damage=yes to every single building, you can just click
> > onto the third checkbox (on the very right of screen) called
> > Inverse filter (which show nothing but what is in the filter) and
> > on the map are only those elements mentioned in the filter active
> > (for instance on filter building=collapsed only those houses). Drag
> > over whole area you have been edition by mouse, go to main menu →
> > Selection → Unselect nodes and you have only building=collapsed
> > selected. Add typhoon:damage=yes and do the same with
> > building=damaged
> >
> > xkomczax
> >
> > _______________________________________________ HOT mailing list
> > HOT at openstreetmap.org https://lists.openstreetmap.org/listinfo/hot
> >
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.11 (GNU/Linux)
> Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/
>
> iQIcBAEBAgAGBQJSg7RoAAoJEK7RwIfxHSXbhsAQAIi02gPjiEs75iTmBk4ZwvKC
> jjhAWjFy/4c8rgG/NgGvnkB9phdSaNh9wYx9yXFf2UzTd1mA7Ay5iKdcVjh848Hk
> Wr+KOgksAO/a1/hfd+uIWWxIVSFzl3KO6WNjJ1n760DUCLxdKaJ52gPmEghW42md
> BiV1KJGEOHaZn+9Er1EKATMJQnnR14tQLe9/qn6eSAoRlvYO9Wfk7QLluKpi7d84
> uaehIJxXDdVA9C1EDJqOgpLyrNCLf5/ppGdv94uH3KicZNUFlUEVCWVblzcr0gOy
> SvPf8EtDsnNAdcBrzz71LdsGTvD/lVFSmz2FA4R9oJBPN4G6k1Tb9qoeNLqAAZg+
> eXXEFeKSO9Q3iIZRsDBc8T0hP/yRUTaiTYNwiVzLB2AaJLMh+I/PwtuEDp0nmHaN
> v6ONCigjE5Lf4Zp/p7JXMyEc7jFExgHpjHTmB36iUl/74Bf4AqB8gDHvBrpr1iIt
> 9Cz6DNu8TyI+e0jUpk+/Xk014NFw/XoDTXYtq7VV+d7qUBNEWC9bRcvds1e/xPZc
> p/5K2+/aHLfMkArB6ZDEI7wfADGtTfxFmmDChN2EQh1/GjUfEaLWXFJYozKiA4rj
> IV+vKHlELmqm/YAvQXQNcSTkdul3CKLh/y7dSLQORPy67a/A016lC/lC0tLyqqfv
> t8pcxU1kDviXMKQ7tTt6
> =UvrC
> -----END PGP SIGNATURE-----
>
> _______________________________________________
> HOT mailing list
> HOT at openstreetmap.org
> https://lists.openstreetmap.org/listinfo/hot
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstreetmap.org/pipermail/hot/attachments/20131115/5b6a833c/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Haiyan_buildings.mapcss
Type: application/octet-stream
Size: 743 bytes
Desc: not available
URL: <http://lists.openstreetmap.org/pipermail/hot/attachments/20131115/5b6a833c/attachment-0001.obj>