[OSM-talk-be] CIRB Orthophoto through WMS
Julien Fastré
julien at fastre.info
Fri Jul 19 07:40:50 UTC 2013
The good news is that it works with other projections :-)
The main problem I have with projection 3857 (and 4326) is that tiles
does not reload when I change projection. I do not know why.
I am abroad for one week. I will stop the geoservice during this time -
I am not sure it doesn't kill other service due to limitation memory.
We will talk deeper when I will be back.
Julien
Le 19/07/13 02:27, André Pirard a écrit :
> Julien,
>
> It should be avoided like the plague to reconfigure the screen map
> projection of JOSM.
> Especially when it is not necessary ... see below ...
> JOSM normally uses Mercator EPSG:3857 screen projection.
> That way, it can display maps served in EPSG:3857, EPSG:900913 and
> EPSG:4326.
> That is what almost all servers in the world serve, sometimes in
> addition to local projections.
> This (EPSG:4326) is what IGN, AGIV and Urbis can serve in addition to
> Lambert.
> But SPW can only serve Lambert.
> It should be *urgently* asked that all servers support at least
> EPSG:4326 like the others.
> In addition to what they already use, that is.
>
> The reason is that if JOSM cannot reproject data.
> If it is screen configured with Lambert, it will be unable to display
> 4326 data, notably Bing maps but many others.
> The reason is that Openlayers cannot reproject data (too CPU consuming
> in JavaScript).
> The reason is that Merkaartor is buggy when it converts Lambert->Mercator.
> The reason is that, like Merkaartor, most programs are mostly tested
> with 4326 and may show bugs otherwise.
> The reason is that there are many reasons.
> The reason is also that if you use screen projection-1 for this job,
> projection-2 for this another and projection-1 for yet another, you
> will soon be fed up constantly reconfiguring JOSM and stopping it, and
> most of all forgetting to reconfigure it and wonder why you don't see
> your map.
>
> If it's really impossible to have a server configured to serve 4326,
> the best solution is to use a proxy that reprojects it.
> I have used Mapproxy very effectively that way, but it's a tedious job
> to configure it.
> It would be much more effective to set up a single Mapproxy for all of
> us, especially with a good cache.
>
> But by far the simplest way is to configure the source servers to
> serve EPSG:4326.
> *So simple that your server is already configured for 3857 and 4326.**
> **There is NO NEED to reconfigure the JOSM screen.**
> *See here the impressive list of projections that your server
> supports.
> <http://fastre.info:8080/geoserver/OSMUrbis/wms?REQUEST=GetCapabilities&SERVICE=WMS>
> Here are the WMS requests to get your images (in EPSG:3857):
>> GET
>> http://api.openstreetmap.org/api/0.6/map?bbox=4.3557754,50.84655,4.3845868,50.8600845
>> Grabbing WMS
>> http://fastre.info:8080/geoserver/OSMUrbis/wms?SERVICE=WMS&FORMAT=image/jpeg&VERSION=1.1.1&SERVICE=WMS&REQUEST=GetMap&LAYERS=StJosse&STYLES=&SRS=EPSG:3857&WIDTH=500&HEIGHT=500&BBOX=486150.9468658,6595682.2161044,486402.0578921,6595933.3271307
>> Grabbing WMS
>> http://fastre.info:8080/geoserver/OSMUrbis/wms?SERVICE=WMS&FORMAT=image/jpeg&VERSION=1.1.1&SERVICE=WMS&REQUEST=GetMap&LAYERS=StJosse&STYLES=&SRS=EPSG:3857&WIDTH=500&HEIGHT=500&BBOX=486150.9468658,6595431.1050781,486402.0578921,6595682.2161044
> ...
> ... and I saw your images perfectly.
>
> I hope that this little blurb will help make more usable servers in
> Belgium.
>
> Cheers,
>
> André.
>
>
>
> On 2013-07-18 17:07, Julien Fastré wrote :
>> Hi,
>>
>> With the help of eMerzh, yesterday, we converted the raster image
>> downloaded from Urbis to a geotiff (georeferenced tiff).
>>
>> I upload the image to my (little) server and I could serve it through
>> a WMS, and the use it as imagery in JOSM.
>>
>> Could you try if it works by yourself ?
>>
>> This is a short manual:
>>
>> * launch JOSM;
>> * go to the preferences (F12)
>> * Switch to Lambert Belge 1972 (third tab on the left - map
>> preférences / préférences de la carte) (the geotiff is in Lambert
>> Belge, EPSG:31370) ;
>> * Add the WMS service:
>> o go to WMS/TMS ;
>> o click on +WMS
>> o add the URL : http://fastre.info:8080/geoserver/OSMUrbis/wms
>> o click on "obtain the layer" / obtenir les calques ;
>> o select the commune of St-Josse (currently the only one available)
>> * Then, download the OSM data in Saint-Josse ;
>> * Zoom to a high level (a high level does lower requests, it will
>> be more fast)
>>
>>
>> The server is very little (512Mo), the geotif are quite big (~5Go).
>> This is just a test (we should also add a licence on the service...)
>>
>> I will let the server open until tomorrow around 10', then I will
>> stop for a week. Then, if it works, I may consider host some commune
>> - we may talk about that.
>>
>> (Another easier way may be to share the geotiff by torrent, everyone
>> may use it in JOSM with a good tutorial)
>>
>> Julien
>>
>>
>> Le 17/07/13 22:15, Julien Fastré a écrit :
>>> Hi !
>>>
>>> Thanks for all those informations !
>>>
>>> It's a good news that CIRB have some considerations for OSM.
>>>
>>> I am also trying to convert sid to jpg (I skip that line in your
>>> email), but I must re-compile GDAL.
>>>
>>> If you have geotiff or some commons georeferenced raster I may serve
>>> them with WMS through geoserver from my (little) server.
>>>
>>> Julien
>>>
>>> Le 17/07/13 15:38, eMerzh a écrit :
>>>>
>>>> Dag Jo ;)
>>>>
>>>> For 3D i think they mean like 3d buildings (with a CAD tool or smth
>>>> ) like OSM3D & friends
>>>>
>>>> They also have like "oblique" images ... it think it's more or
>>>> less like bing birdview ... but there are not released ... (yet ?)
>>>>
>>>>
>>>> For the ortho, i've convert my first sid file to jpg ... i have to
>>>> figure out how to cut that in tiles and georef them...
>>>> i'm really a nooob in that area so if someone can help :)
>>>>
>>>>
>>>>
>>>>
>>>> 2013/7/17 Jo <winfixit at gmail.com <mailto:winfixit at gmail.com>>
>>>>
>>>> Je pense que Glenn Plas a les compétences réquises (et un
>>>> serveur?).
>>>>
>>>> Glenn, weet jij hoe je een server moet opzetten die WMS doet op
>>>> basis van deelimages?
>>>>
>>>> Jo
>>>>
>>>> 2013/7/17 eMerzh <merzhin at gmail.com <mailto:merzhin at gmail.com>>
>>>>
>>>> Ah oui,
>>>> j'ai oublié :
>>>>
>>>> * le LIDAR sera mis à disposition dans le futur sous la
>>>> même license ...via iribox...
>>>> pour l'instant ce n'est pas encore disponible, a cause d'un
>>>> problème de distribution ....
>>>> ( il y a ~900Fichiers de 900 Mo chacun ...)
>>>>
>>>>
>>>> Voilà ...
>>>>
>>>> Sinon, je voudrai mettre a dispo les ortho pour les
>>>> utiliser dans JOSM ... donc je cherche un moyen de faire ça ...
>>>> (je serai p-e ralenti par mes vacances et par le faite que
>>>> je ne dispose pas vraiment d'un serveur ou je fais ce que
>>>> je veux... )
>>>>
>>>> je vous tiens au courant :)
>>>>
>>>>
>>>>
>>>>
>>>> 2013/7/17 eMerzh <merzhin at gmail.com <mailto:merzhin at gmail.com>>
>>>>
>>>> Hi everybody ...
>>>> here are the feedback from my meeting with the CIRB.
>>>> as i'm more confortable with french the following
>>>> message will be in french ... sorry
>>>>
>>>> Donc :
>>>> * Au niveau des mises à jours, le wfs & wms est
>>>> actualisé toutes les semaines alors que l'interface de
>>>> téléchargment ne l'est que 1 fois par trimestre.
>>>>
>>>> Attention, la mise à jour correspond à l'état actuel
>>>> du survey ... toutes les zones ne sont pas mises à
>>>> jours toutes les semaines...
>>>> * A chaque mise à jour d'un objet, un ID de version
>>>> centralisé est incrémenté et attribué à un objet.
>>>> donc pour savoir les derniers objets avec des
>>>> "potentielles" mises à jours, il faut trier les objets
>>>> par identifiants de version desc.
>>>>
>>>> * un nouveau système de versioning plus sémantique et
>>>> informatif sur les modifications devrait voir le jour
>>>> début de l'année prochaine
>>>>
>>>> * Le cirb est évidemment intéressé par les retours sur
>>>> les données.
>>>> Vous pouvez faire vos retour soit via moi (un petit
>>>> mail ) soit via la page du wiki ici présente:
>>>> http://wiki.openstreetmap.org/wiki/Urbis_feedback
>>>> ou directement via la IRISLINE (
>>>> http://www.cirb.irisnet.be/fr/catalogue-de-services/software/sincrho-1/centre-de-documentation/manuels-de-reference/mode-demploi/contacts/support-client-iris-line
>>>> )
>>>> l'idée est d'envoyer les retours en paquet plutot que 1
>>>> par 1 pour éviter un surplus de travail
>>>>
>>>> * Les orthophotos sont disponibles au téléchargement
>>>> via la Irisbox ou via le servie de DL
>>>> (http://www.cirb.irisnet.be/fr/catalogue-de-services/urbis/telechargement)
>>>> La résolution est de 7.5cm si téléchargé par commune et
>>>> 10cm? si téléchargé pour la région entière...
>>>> Elles sont évidemment disponible sous la même licence
>>>> que le reste.
>>>>
>>>> * La 3D devrais arriver l'année prochaine ... elle
>>>> aussi sous licence libre.
>>>>
>>>> * Pour tout ce qui est routage (vitesse, circulation,
>>>> restrictions, ...) , le CIRB n'a pas de données.... il
>>>> faut s'adresser à Bruxelles mobilité (mais c'est pas
>>>> certains qu'ils possèdent l'info , ou pas forcément à
>>>> jours)
>>>> voir http://data.irisnetlab.be/ pour les données en
>>>> OpenData
>>>>
>>>> * Pour les infos PMR: voir BXL mobilité ou les communes
>>>> directement.
>>>>
>>>> * Dans Urbis les données sur les oneway par exemple ne
>>>> sont pas à jour ... et il ya pas de plan de le faire ....
>>>> ils pensent à éventuellement Crowdsourcer ...
>>>>
>>>>
>>>> * Pour les impétrants , pareils il faut demander au
>>>> impétrants eux même .... le CIRB n'a pas l'info
>>>> pareil pour les hydrant (au pompiers ou a vivaqua)
>>>>
>>>> * Nous sommes invité à participé au UserClub du CIRB ...
>>>>
>>>> * Le CIRB à rappelé son intention de publier
>>>> directement les nouvelles données sous licence libre
>>>> pour autant qu'ils aient la possibilité de le faire.
>>>>
>>>> * J'ai parlé d'éventuel support de OSM: "Pourquoi
>>>> pas... " ... ils vont voir avec le service de com' ...
>>>> si on veux leurs soutient dans des évènements ponctuels
>>>> , on peu tjs tenter notre coup.
>>>>
>>>> * Il n'ont pas forcément besoin que OSM-be soit une
>>>> entité juridique (ASBL, ...) l'organisation actuelle
>>>> suffit.
>>>>
>>>>
>>>> FYI, la réunion était avec Mr E. Auquiere, C Hannecart
>>>> + une 3ieme personne dont j'ai oublié le nom.
>>>>
>>>>
>>>> En écrivant le résumé j'ai déjà plusieurs question qui
>>>> me viennent pour un éventuel autre contact . donc
>>>> n'hésitez pas on fait un batch ;)
>>>>
>>>>
>>>> Voilà je pense avoir tout dit ....
>>>>
>>>> Bonne journée sous le soleil ;)
>>>>
>>>> Brice
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Talk-be mailing list
>>>> Talk-be at openstreetmap.org <mailto:Talk-be at openstreetmap.org>
>>>> http://lists.openstreetmap.org/listinfo/talk-be
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Talk-be mailing list
>>>> Talk-be at openstreetmap.org <mailto:Talk-be at openstreetmap.org>
>>>> http://lists.openstreetmap.org/listinfo/talk-be
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Talk-be mailing list
>>>> Talk-be at openstreetmap.org
>>>> http://lists.openstreetmap.org/listinfo/talk-be
>>>
>>>
>>>
>>> _______________________________________________
>>> Talk-be mailing list
>>> Talk-be at openstreetmap.org
>>> http://lists.openstreetmap.org/listinfo/talk-be
>>
>>
>>
>> _______________________________________________
>> Talk-be mailing list
>> Talk-be at openstreetmap.org
>> http://lists.openstreetmap.org/listinfo/talk-be
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstreetmap.org/pipermail/talk-be/attachments/20130719/327599f6/attachment.htm>
More information about the Talk-be
mailing list